top of page
AMPLIFON SET 140

AMPLIFON SET 140

Condition: 9/10

 

Product: AMPLIFON SET 140

Serial Number: **

Cosmetic Description: 9/10 The product is 100% perfect condition as new. It was not repaired, it has no scratch, no defect. 

What is Included: without original packaging, without manual. For transport, a special wooden box and anti-shock pads will be ordered

Functional Notes: Operational condition of this item is excellent, fully tested and no issues found.

Age: /

# of Owners: 2

Tobacco Exposure: No

Service History: None

 

The input stage is based on a EC86 triode with a high degree of linearity, an output triode is driven by a 6C41C, and all voltages are stabilized (the anode voltages of the input tubes, the driver , the output stage, the filament heaters of the input stage, as well as the heaters of the driver and output stages).

  • Technical Specifications

    Made in Poland, the AMPLIFON Set 140 monoblock amplifiers.

    The input stage is based on a EC86 triode with a high degree of linearity.
    The output triode is driven by a 6C41C.
    All voltages are stabilized (anode voltages of the input tubes, the driver tube, the output stage, the filament heaters of the input stage, as well as the heaters of the driver and output stages).
    The device is equipped with a soft start mechanism and an autobias. It does not require from the user any whatsoever “regulation” or “trimming” activities during the normal course of usage.
    Special security means are built in, so as to detect and accordingly react to too high a current of the output tube, and/or too high a temperature within the device.
    The amplifier also signals the end of life condition of the power output tube, where the working current of the output tube is below an acceptable threshold level.

    The specs: 
    Output Power ………………………….140W
    Frequency range ………………...........06 Hz – 41 kHz (1W -3dB)
    Frequency range ………………...........23 Hz – 37 kHz (130W -3dB)
    Distortion ………………………………..< 0,2% 10W 1kHz
    Output Noise Level .....................……..< 0,5 mV
    Input Sensitivity ........…………………..1,6V RMS
    Input Impedance .............……………...120 Kohm
    Speaker Output Taps ............………... 4 ohm, 8 ohm
    Power consumption …………………..500W
    Dimensions (W*H*D) ...............:…….. .310 * 410 * 690 mm
    Weight pcs ……………………………. ~70 kg
    Inputs……………………………………RCA WBT
    Output posts ........……………………..WBT gold plated copper, accepts bananna plugs and spades.
    Interstage Capacitors .......……………VCap CuTf or: Duelund Cast PioCu
    Resistors in audio path ........…………Shinkoh Audio Note

  • AE PRE-OWNED POLICY

    At AudioGOM, we proudly offer compelling trade-in value for pre-owned equipment, meaning from time to time we come across some great pre-owned items that we can put into the hands of our clientele! Each one of the items in our pre-owned/demo inventory has been vigorously tested and cleaned to ensure the utmost in quality. Please have a look at our selection, and be sure to check in regularly as we update the page on a weekly basis. Be sure to let any of our staff know if you have any questions or inquiries regarding any piece you may be interested in. Happy shopping!

  • AudioGOM Grading Scale

    11/10: New - Factory Sealed Shipment Items classified as "NEW" must be in a factory-sealed box. Sellers must specify any manufacturer warranty included. Some manufacturers honor warranties only if purchased from an authorized dealer, while others limit warranties to the original owner, even if the item remains unopened. Any "NEW" listing should include a warranty statement. If absent, buyers should confirm details with the seller. Assumptions should be limited to the item being factory sealed.

    Items opened for inspection or any other reason should not be rated as "New."

    10/10: Mint - Like New, Unused Appearance "Mint" signifies an item that looks factory fresh. To qualify:

    • Removed from original packaging, no more than a year since first use, and manufactured within the last five years.
    • Electronics must be free from scratches, blemishes, discoloration, and connector wear.
    • Speaker grilles should have no pulls or discoloration; speaker bottoms should not show floor wear.
    • Turntables must appear unused with pristine covers free from swirls, dust, or fingerprints.
    • Pre-owned and demo items rarely meet this standard. A thorough inspection is recommended.

    9/10: Excellent - Nearly Perfect, Minimal Use

    • Typically one-owner or store-demo items.
    • Electronics should look factory fresh, with only minor dust in crevices.
    • Connector plating may show slight signs of use but without discoloration.
    • Speakers should be flawless except for minor stand-mounting marks on the back or bottom.
    • Wood finishes must not exhibit sun fading or uneven discoloration.
    • Turntable covers may show slight lift-wear but should remain clear and scratch-free.

    8/10: Very Good - Perfect Front, Minor Side or Top Flaw

    • Front face and front top edge must be flawless.
    • Electronics may have up to two minor (max 1/2" long, very thin) scratches on top or sides.
    • No rack mounting evidence.
    • Speakers may have minor discoloration or scratches that do not penetrate veneer.
    • Turntable covers may appear slightly hazy but free from deep scratches.

    7/10: Good - Light Wear, Well Maintained

    • Electronics may have minor scratches, wear on knobs/switches, and slight pitting on chrome.
    • Speakers may have loose covers or minor fabric pulls but remain structurally sound.
    • Turntable tonearms may show heavy scratches from cartridge replacements.

    6/10: Fair - Noticeable Wear, One Major Scratch Allowed

    • Electronics may have a visible scratch over 2" long or a small dent, but the front panel must remain intact.
    • Chrome may have visible pitting but should not flake.
    • Speakers may have a single significant scratch through veneer (up to 2" long, 1/16" deep).
    • Turntable dust covers may be scratched but not cracked.

    5/10: Average - Multiple Scratches, Some Front Wear

    • Electronics show clear signs of use, including minor front-face scratches.
    • Chrome may have minor flakes.
    • Transformer covers may have rust.
    • Speaker grilles may not stay on securely.
    • Turntable tonearms may have broken clips, and covers may be cracked.

    4/10: Mediocre - Fully Functional but Rough Condition

    • Electronics may have broken displays, bent levers, or significant surface wear.
    • Chrome shows severe pitting, and transformer covers are rusted.
    • Speakers may have dented corners or damaged binding posts.
    • Turntables may lack covers or have significant discoloration on platters.

    3/10: Poor - Heavy Wear but Functional

    • Electronics exhibit rust, pitted chrome, and oxidized binding posts.
    • Speakers may have deep scratches or missing veneer but intact drivers.
    • Turntables function but appear heavily worn.

    2/10: Very Poor - Functional Issues, Damaged Components

    • Electronics may have major dents, missing knobs, and inconsistent functionality.
    • Speakers may have torn drivers or severely damaged enclosures.
    • Turntables may have warped platters or faulty tonearms.

    1/10: Shot - Parts Only

    • Non-functional and suitable only for salvage or repair.
€8,400.00Price
VAT Included
Quantity
Only 1 left in stock

© Copyright 2015-2025 AudioGOM 

bottom of page